Tefal’s Master Precision 360° Garment Steamer is a versatile and easy-to-use steaming tool that provides efficient results in no time, with great performance even in tricky, hard-to-reach areas through the precision shot feature. It is a great solution to smooth out creases and refreshes garments from odors. Ideal for both intensive steaming sessions or last-minute touch-ups, to help you look your best whenever you need it. Safe on all Fabrics even the most delicate.
With versatile and precise performance down to the last detail, Master Precision 360° Garment Steamer smoothes out wrinkles in no time, for impeccably smooth and fresh garments whenever you need them.
The 360° rotative hanger lets you steam the front and back of any garment with total ease, while the precision shot helps tackle tricky, hard-to-reach areas.
Ready to go in just 45 seconds, this versatile steamer is ideal for any type of fabric, even the most delicate, for both last-minute touch-ups and intensive steaming, with the large 2.
5 L water tank providing up to 80 minutes of use.
Enhanced features round off an exceptional steaming package: an adjustable pole, a robust hanger, integrated pant clips, large wheels for easy movement, and three handy accessories.
Essentials
Precision shot on demand
Easy and precise wrinkle removal down the last detail: tackle difficult-to-reach areas with the precision shot that concentrates steam through the tip of the steam head
One-handed comfort and ease
Easy steaming on the front and back through the 360° rotative hanger, for added convenience and efficient performance.
Save time
Cut down on time spent on linen care: no trips to the dry cleaner, no ironing board, and a fast heat-up time of just 45 seconds.
Easy Refilling
2.5 L removable water tank allows up to 80 minutes' steaming, perfect for intensive steaming sessions and last-minute touch-ups.
Easy to use
Simple on/off foot-operated pedal, with adjustable pole and robust hanger with integrated pant clips.
Easy transportation
2 large wheels to use your appliance anywhere in the house.
Refreshes & sanitizes
1500 W of power and steam output of 30 g/min allow deep diffusion through the fibers to refresh and sanitize all kind of garments.
Adapted to all fabrics
Use your steamer on any fabric, even the most delicate, with no risk of burning!
Handy accessories
3 accessories included: - Fabric brush: to open the weaves of the fabric for better steam penetration, ideal for removing creases on thick fabrics - Crease attachment: to create pleats in your pants - Steam Bonnet: to provide even distribution of steam, filter water impurities and protect fabrics from water drips.
Precision
Large and triangular metal steam head with pointed tip to remove creases efficiently on all fabrics
• Untreated tap water: Your appliance has been designed to use untreated tap water. If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use: Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance: - water from clothes dryers - scented or softened water - water from refrigerators, batteries, air conditioners - rain water - boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The water level in the tank is too low ==> Unplug the appliance and fill the tank. The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump. The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product. The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre