Tefal Prostyle Garment Steamer smoothes wrinkles and removes creases from any fabric with utmost ease. Suitable for both last minute touch ups and intensive steaming sessions, this high-efficiency steamer is a great time-saver with a start-up time of just 45 seconds. There's no need for an ironing board or endless trips to the dry cleaner. Compact in size, yet highly efficient, this steamer is equipped with features for exceptional convenience and ease-of-use, and can also be used to refresh or sanitize sofas, curtains and sheets, in addition to garments. A removable watertank means no more steam hose length constraint. Benefiting from 1700W of intense power and a steam output of 30 g/min for deep diffusion through the fibers, this garment steamer will save you both time and energy.
Essentials
Time saving & precision
Large metal steam head with pointed tip to remove creases efficiently on all fabrics
Fast Heat up
No need to go to the dry cleaner. Linen care sessions are made quicker with a fast 45-second heat-up time and no need for an ironing board.
Ease of use
Simple on/off setting and a 1,5L water tank with continuous refill, for up to 40 minutes of steaming. Perfect for intensive steaming sessions and last minute touch-ups.
Refreshes & Sanitizes
1700W, referesh, Sanitize and kills bacteria on all garments, textiles
Adapted to all fabrics
3 levels of steam output to remove creases on all kind of fabric, even the most delicate.
Fabric brush included
Fabric brush that opens the weaves of the fabric for better steam penetration, ideal to remove creases on thick fabrics
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The water level in the tank is too low ==> Unplug the appliance and fill the tank. The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump. The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product. The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre